Your vehicle in your hands. All about auto repair.

How to repair Changhe M70 brake rotor

Brakes Technician
Steven Robinson
If you want to know how to replace brake rotor in your car, learn how to replace brake rotor step-by-step!
If you feel that something wrong with information above, so inform us about that!

How much does a brake job cost for a Changhe M70?

The average cost for a Changhe M70 brake pad replacement is between $243 and $275. Labor costs are estimated between $79 and $99 while parts are priced between $164 and $176. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

How much do Changhe M70 rotors cost?

RepairSmith offers upfront and competitive pricing. The average cost for Changhe M70 Brake Rotors Replacement is $310.

Does Changhe M70 have a lifetime warranty?

The factory Changhe M70 warranty lasts four years/100,000 miles, whichever comes first. The longest you can be protected by Changhe M70 is seven years/100,000 miles from the in-service date. This would include the four-year limited warranty coverage plus three years of extended coverage.

How long do Changhe M70 brake rotors last?

Rotors may need to be replaced anywhere from 15,000 to 70,000 miles. Here are some signs your Changhe M70 is ready for new brake rotors.

How much does a brake job cost Changhe M70?

The average cost for a Changhe M70 brake pad replacement is between $279 and $296. Labor costs are estimated between $65 and $82 while parts are priced at $214. This range does not include taxes and fees, and does not factor in your specific model year or unique location.

What causes scoring on brake rotors on a Changhe M70?

Scoring usually occurs when the frictional material on the brake pads has been worn down severely. Once this "padding" is gone, the underlying metal scrapes against the rotor during deceleration. Over time this can lead to deep grooves on the rotor surface.

Are vented brakes worth it?

Drilled, Slotted & Vented Brake Rotors - What's Best? - And so it basically pumps the air out and helps to evacuate that heat and allow for better cooling. And longer lasting rotors that don't fade as you get into higher temperatures.

Is it cheaper to replace or resurface rotors?

But sometimes replacing a rotor is a better option from the start. For instance, the cost of many rotors today is far less than in the past. It is often more economical to simply replace a rotor than to have it resurfaced, saving you time and money.

Can warped rotors be fixed on a Changhe M70?

Sometimes your rotors may need to be resurfaced because they have worn unevenly, warped from heat, or become damaged by worn brake pads or pitted from corrosion or rust. Resurfacing rotors removes some of their metal, until the surface is smooth and even again.

How much is the labor to replace rotors on a Changhe M70?

Rotors cost between $30 and $75 each. Labor to replace rotors and pads is around $150 to $200 per axle. Brake pads and rotors come out to around $250 to $500 per axle.
Add comment

Comments on how to fix brake rotor on a Changhe M70:
Use an air can or compressor to push out the.2% of extra oil and you'll be fine.
Excellent work What tools did you use to take the glow plug out? Did you also replace the control unit for glow plug?
traps the dirt bro that why its there
i keep trying and the key lock just won’t come out what should i do?
If you want to save your engine I'd take out the k&n and put a OEM type one back in. K&N filters have a problem with 'filtering'. Dust will pass through as well as oil from the pleats which can damage air flow sensors. I know we would all like to believe that these filters boost performance, but the fact is they just don't.
You’re a lot calmer than I would’ve been about getting my top slashed.
Hello I enjoy your video You said in the beginning of the video ' they showed error » I was ondering if all 6 showed error and if you remember the codes? As for me i have experiences -5 degres very hard starts quite suddenly and ista d showed me the code 004212, 004222, 004232 and so on to 004262 Before changing all 6 plugs i was windering if you had the same type of obd error Kind regards
did you have to chop any part of your body, i have a celeste i want to do a similar build
Kuhita na ug flat screen pre...
Last time iv checked, these filters let too much dirt into the engine... Was it updated to filter more dirt?
thank you
Shit i need that truck man
You don’t have to take the wheel off to unplug it. Turn the wheel all the way to the left and you have a large opening to access the alarm module behind the fender. I took a long flathead screw driver and un did the clip. Took me literally 5 mins. Sunroof works again
Hi Kaleb, great demo on filter replacement. I couldn't have done it without your video. I do have a question. How did you get the clip back on the glove box from the small spring cable. I cant get a tool on it to snap it back on. thanks
God I luv that E30 you have all my favorites.
Приветствую. а вы не думали заглушить ЕГР? или даже не ЕГР а эти как говорят 'бабочки' во впускном, чтобы они не влетели в двигатель, а то пугают что они вылетают и гробят двигатель... видел в одном видео, как их вытвщили и заглушили. по моему на канале СЕКРЕТНЫЙ ГАРАЖ. если смотрели, что думаете? там они это проделывали на ..., но думаю у нас одно ито же. спасибо
Man that s70 is sweet!
Great video thanks for sharing
I may have to change my glow plugs too. Is it easy to remove glow plugs from the engine? Any tricks? I am a little scared if the plug head could break in the engine. Do I need to run the engine hot? Thanks!
Tanong ako boss, ano problema sa 6m61 idler gear crack mga ngipin, 3 times nako replace