Your vehicle in your hands. All about auto repair.

Check expansion valve on Toyota Land Cruiser 100

Heating & Air Conditioning Professional
Kenneth Wright
You ask how to replacing expansion valve in your car, I’ll show you the quick review how to change expansion valve step-by-step!
If you feel that something wrong with information above, so inform us about that!

What happens when expansion valve fails?

Whenever there is a faulty expansion valve, there will be fluctuations in its ability to control refrigerant flow in the unit. If this happens, the air from the vents will be too cold or warm. The air will constantly shift back and forth between various temperatures at different times.

What is electronic 2005 Toyota Land Cruiser 100 expansion valve?

The electronic expansion valve is a device that is used to control the refrigerant flow into the evaporator in precise amounts. Therefore, they can be found in air conditioners, heat pumps, and other equipment that follow the refrigeration cycle. Image from Fundamental Refrigeration.

How do you adjust an 2022 Toyota Land Cruiser 100 expansion valve?

Why and How to Adjust a TXV / TEV - The amount of pressure that it allows into the evaporator. So it actually starts to close down and restrict the more it restricts. The lower the suction pressure drops.

How does an expansion valve drop pressure?

As the flow is restricted, several things happen:
  1. The pressure on the liquid refrigerant drops
  2. A small amount of the liquid refrigerant is converted to gas, in response to the drop in pressure

When should I replace my expansion tank on a Toyota Land Cruiser 100 2021?

The average life of your tank can be anywhere between five and 10 years. You can extend the life of your expansion tank by making sure that your home's water pressure matches the air pressure in your expansion tank.

Do cars have orifice tube and Toyota Land Cruiser 100 2020 expansion valve?

An expansion valve is an AC component that is commonly found on many road going vehicles. It is usually installed at the evaporator inlet and works together with the orifice tube to regulate the flow of refrigerant through the vehicle's AC system.

What does expansion valve look like on a Toyota Land Cruiser 100?

Thermostatic expansion valve working principle, HVAC Basics vrv heat. This super heats the refrigerant vapour and the sensing bulb of the expansion valve is monitoring this temperature to control the refrigerant. So let's have a look at an example.

Where is the thermal expansion valve on a Toyota Land Cruiser 100 2010 located?

The TXV is located near the indoor evaporator unit of your air conditioner. The main part of the valve is installed on the liquid line, while a capillary tube and bulb sensor are connected to the suction line.

How much does AC expansion valve on a Toyota Land Cruiser 100 2000 cost?

When you take your car in, you should be ready for a pretty wide range of possible prices. Depending on what type of car you have and the mechanic that you take it to, an AC valve replacement could cost anywhere from $200 to $700 for parts and labor.

How do you test an electronic expansion valve?

Perform an "Closed Valve Test" per Service Facts instructions. Remove the stepper motor from the EEV 15 seconds after jumping the pins. If the valve is closed and refrigerant continues to flow, then check valve is leaking. Use a pinch off tool and crimp the tubing between the check valve & EEV.
Add comment

Comments on how to fix expansion valve on a Toyota Land Cruiser 100:
My 04 Escalade isn't flanged they are all pipe fittings
And furthermore, if you have a vacuum leak anywhere in the HVAC system the loss of vacuum will cause this pod to open the defroster.
You will mainly find these in critical buildings such as labs and hospitals. Not too common outside of that
Are you employed in this plant?
assalammualaikum...w arahmatullahi sku...kedai kw dekat mana...dulu di inanam kn kmu pinda di bahagian mna sda ah
Traduceti si Romana,chiar asa de scârbă este limba asta?
Very nice and detailed explanation, Sir plz make like such video on Air Cooled Chiller also, thanks
Very good!
wish you would of shown more of how to remover blower and plastic housing that gos around expansion valve
Very good animation.
Kelan kaya ako magkakaroon. ng car hahaha, pangarap ka na lang ba hahaha.
How much ml compressor oil
Plz Visit our page and send that page you are all video thanks
Good explanation, Thank you.
Thanks couldn't find anything about changing the Expansion valve didn't know if I had to take the - out or if I could just get right to it thanks again
AC is never fun to work on. The newer cars you almost have to pull the entire dash off
Jantlar kaçlık
Tima kasih video Alan Style..moga lebih berwawasan
Salam boss.. coling coil saga iswara tu same ke dgan wira
I have 2010 ram with 4.7..I going to replace the condenser. do i need to add oil to it before i installed it?
Thank you for making this. On the list for a Civic and saw the “go from the inside” video. This will be very helpful.
Hi where is your shop location?
Mana ko punya bengkel ni bosku?
What micron level did you vacuum to prior to filling? Just wondering what you got to with a leaking evaporator?
Thanks for fully understand
Out of pure curiosity, does this particular valve allow air to pass through it even when the sensing bulb is cold? The same valve is featured on later model years of the Sonata, which have variable displacement compressors (the one on this car is fixed displacement and has a cycling clutch), and these ones definitely need a valve that never closes completely, or they will seize due to insufficient lubrication...
Bro. Minyak compressor masih ok. Tapi masih tak sejuk. Selalu bunyi belting. Apa yg patut kena tukar ya? MYVi...
Good explanation and video.  Very helpful.
Sir hamari press ka kock ghumane par band ho jati h
Man, you always seem to make a video on stuff I'm thinking about too LOL. I used to bottom out all the time. I had those same Methods in black, but I thought it was because of the 0 offset wheel, and that I went to 285's. I've since gone back to a 275 running on Icons. The Icons have a +25mm offset. I'm definitely thinking of getting these bump stops when I do my suspension upgrade. Are they still holding up? Question: how did you get the front caps on your wheels?