Your vehicle in your hands. All about auto repair.

Check exhaust mounting on Renault Alpine A310

Intake & Exhaust Professional
Anthony Hernandez
You ask how to remove exhaust mounting in your car, you can see the video manual how to remove exhaust mounting with no problem!
If you feel that something wrong with information above, so inform us about that!

How do V Band exhaust clamps work on a Renault Alpine A310?

Tech Tip: Exhaust V-band Clamps - So the flanges are welded on but they're not welded together. And they're held in place by the v-band clamp which you screw together and tighten with a nut and that's what makes it removable.

What temperature does a car Renault Alpine A310 exhaust manifold get to?

When the gases are coming out of the engine, they are at their hottest point. This is where the gases could easily reach 1,200 degrees Fahrenheit, especially if you are pushing the vehicle hard.

What is an exhaust bracket on a Renault Alpine A310?

The exhaust system hangers, also known as exhaust supports, are the mounts that are used to secure and support the exhaust pipes to the underside of the vehicle. The exhaust hangers are usually made of rubber to absorb vibrations from the engine and to allow for flex for the exhaust to move as the vehicle travels.

When I accelerate my car doesn't accelerate on a Renault Alpine A310?

If your vehicle speed changes without you accelerating or decelerating it, it could be low transmission fluid levels or a failing clutch. Problems with the ECU - The Electronic Control Unit, or ECU, is the brain of your car.

How much does it cost to fix exhaust leak on equinox on a Renault Alpine A310?

The average cost for a Renault Alpine A310 exhaust manifold replacement is between $421 and $465. Labor costs are estimated between $143 and $181 while parts are priced between $277 and $284.

What size are exhaust hangers?

Overall Width: 112mm (4.4 inch); Overall Height: 46mm (1.8 inch); Depth: 40mm (1.6 inch) Hole diameter: 12mm (0.47 inch). It's a universal automotive tool for the exhaust system of your car, truck, Renault Alpine A310 and SUV.

How does exhaust manifold leak affect performance on a Renault Alpine A310?

A damaged exhaust manifold also often has a negative effect on the performance of your car. By breaking the exhaust system's seal, any sort of manifold leak will slow down the necessary flow of exhaust out of your car. As exhaust backs up, your engine will have a hard time generating its usual level of power.

What problems can an exhaust cause?

Common Exhaust System Problems
  • Faulty Oxygen Sensor. Even though many of today's vehicles having numerous oxygen sensors, a malfunction in just one can be enough to confuse your vehicle's system
  • Exhaust Leaks
  • Exhaust Smoke
  • Rust
  • Broken Hangers
  • Vibrations
  • Increased Engine Noise

How much does it cost to replace an exhaust clamp on a Renault Alpine A310?

‌ A‌ ‌replacement‌ exhaust clamp ‌can‌ ‌cost‌ ‌anywhere‌ ‌between‌ ‌ $5 and $90. ‌ ‌Its ‌exact‌ ‌price‌ varies based on ‌various‌ ‌factors‌, ‌such‌ ‌as‌ fit, location, and material.

How much is it to fix a hanging muffler?

Typical costs: Minor muffler repairs (such as welding a loose but still functioning muffler back in place or fixing broken clamps) can cost $30-$500 or more, depending on the specific work done and local labor rates. CostHelper Readers report paying $40-$300 for muffler repairs, at an average cost of $138.
Add comment

Comments on how to fix exhaust mounting on a Renault Alpine A310:
The noise valve hardly makes any real difference. Disconnecting it doesn't improve the performance at all, and it just makes the sound slightly richer at low end. To disconnect it you need to unplug the vacuum tube that goes straight to the right exhaust, closing it with a screw to avoid a vacuum leak. Or, even better, remove the engine access panel and disconnect the valve actuator (a little electrical switch connected to a vacuum box, it's on the right side) and leave the vacuum tube fitted.
Whats up with the narx kart did you give it away yet???
for your next project please rebuild this wrecked rolls Royce Cullinan
Just imagine, a Ferrari powered GT86, 2JZ powered Nascar and now, an LS powered Huracan...
pls i wanna see a role race with this thing x.x it looks epic im expecting around 1400 to 1600 cause leroy runs on a texas speed ls
You're no worried about water going into the exhaust?
Końcówke dałbym jakąś ładną dwururke i sztosik :)
... this game on your cell phone
Niiice one guys
Wrong silicone, you'll be leaking in 2 years.
we want longer videos
Damnit YouTube use that magical algorithm to get these guys trending and get them noticed they are beasts in the custom car scene and more people need to see them... and thank you MAD for the amazing content
Since Lamborghini started as a tractor company that exhaust needs a some Lamborghini Tractor Flaps.
Nice job. I am going to send in my steering wheel to get redone in my MK3 and the pre shaped gray leather just came in the mail today from redlinegoods. This is the only thing I am doing this winter on the MK3 Supra but you have been super busy.
This is such an underaged channel I literally subscribed just because of this build I’m loving the content!
You should cerikote the exhaust and ic piping,its super thin so you put it on kinda dry like base coat but then it just air drys and works pretty killer on stuff like that, bunch of colors too. Have to sand the pipe w like 120 I think tho
Looks really good guys, well done. And Oscar might be one of the best aluminium welders I have ever seen.
All he has to do NOW to make better sales is. SELL PROP REDUCTION, ECU, and wiring harnesses as a KIT!! He will not sell unless you purchase entire engine kit.
Where can I get plans for a chassis?
valic000 thank you i love them too especially the really tiny ones my smallest one is a Ronald Valentine DiVa 0.098cc it only weighs 10 grams. i do not yet have a video running when i next run it i will get a video.
I want it, I want the car
awesome build
That intro had me in tears! haha Looking good guys!